日本同仁化学Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957- DOJINDO

上海金畔生物科技有限公司代理日本同仁化学 DOJINDO代理商全线产品,欢迎访问官网了解更多信息

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Products > Cryocrystallography > CryoLoops > Mounted CryoLoop™ – 20 micron

Mounted CryoLoop™ – 20 micron

应用

  • Cryocrystallography
  • 低温晶体学

特征

  • Synthetic CryoLoop on stainless steel MicroTube
  • MicroTube specially engineered with EasySnap notches
  • Complete range of loop diameters from 0.025 – 1.0 mm
  • Compatible with all CrystalCap Systems
  • 不锈钢 MicroTube 上的合成 CryoLoop
    MicroTube 特别设计,带有 EasySnap 凹槽
    从 0.025 – 1.0 mm 的完整范围的环直径
    与所有 CrystalCap 系统兼容

描述

Note: If you are using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT, or CrystalCap SPINE HT, save time and money by using the ready to mount 18 mm Mounted CryoLoop.

Mounted CryoLoops with 20 micron diameter nylon. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic..

Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.

注意:如果您使用的是 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 或 CrystalCap SPINE HT,请使用可安装的 18 毫米已安装 CryoLoop 来节省时间和金钱。

安装有 20 微米直径尼龙的 CryoLoops。这些尼龙环与中空不锈钢 MicroTubes™ 粘合,用于在低温晶体学程序和 X 射线数据收集过程中安装、冷冻和固定晶体。 MicroTube 的长度为 24 毫米,专门设计了 10、12、14、18 和 21 毫米尺寸的 EasySnap™ 凹槽。要获得所需长度的 MicroTube,只需将 MicroTube 卡入所需长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。这些尼龙环显示出最小的衍射,很薄,可以快速冷冻,坚固且符合空气动力学。

大多数数据收集几何结构更喜欢或要求帽底和梁之间有 22 毫米的长度。对于使用 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 和 CrystalCap SPINE HT 的 22 mm 总长度,将 MicroTube 从底部的第二个凹口处卡入,形成 18 mm 的 MicroTube 长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。对于 22 mm 以上的长度,使用 CrystalCap Copper、CrystalCap Copper HT、CrystalCap ALS Copper HT 将 MicroTube 卡在从底部算起的第五个槽口(最靠近 CryoLoop 的槽口),并使用环氧树脂或类似粘合剂固定到 CrystalCap。

HR4-965 Mounted CryoLoop 0.7 – 1.0 mm

Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 20 micron/HR4-963/HR4-959/HR4-957

CAT NO

HR4-313

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.025 – 0.05 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-625

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.05 – 0.1 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-955

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.1 – 0.2 mm – 25 pack

PRICE

$84.00CAT NO

HR4-957

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.2 – 0.3 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-959

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.3 – 0.4 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-961

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.4 – 0.5 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-963

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.5 – 0.7 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-965

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

0.7 – 1.0 mm – 25 pack

PRICE

$84.00

CAT NO

HR4-953

NAME

Mounted CryoLoop – 20 micron

DESCRIPTION

Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)

PRICE

$103.00

参考

1. FeeM, an N-acyl amino acid synthase from an uncultured soil microbe: Structure, mechanism, and acyl carrier protein binding. Ryan M. Van Wagoner and Jon Clardy. Structure, 2006, Volume 14, Number 9, 1425-1435.

1. FeeM,一种来自未培养土壤微生物的 N-酰基氨基酸合酶:结构、机制和酰基载体蛋白结合。 瑞安 M. 范瓦格纳和乔恩克拉迪。 结构,2006 年,第 14 卷,第 9 期,1425-1435。

日本同仁化学Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 10 micron/HR4-994/HR4-995/HR4-999/HR4-997- DOJINDO

上海金畔生物科技有限公司代理日本同仁化学 DOJINDO代理商全线产品,欢迎访问官网了解更多信息

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Products > Cryocrystallography > CryoLoops > Mounted CryoLoop™ – 10 micron

Mounted CryoLoop™ – 10 micron

Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 10 micron/HR4-994/HR4-995/HR4-999/HR4-997
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 10 micron/HR4-994/HR4-995/HR4-999/HR4-997
Hampton蛋白结晶试剂盒Mounted CryoLoop™ – 10 micron/HR4-994/HR4-995/HR4-999/HR4-997

CAT NO

HR4-994

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.025-0.05 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-995

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.05 – 0.1 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-997

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.1 – 0.2 mm – 25 pack

PRICE

$91.00

CAT NO

HR4-999

NAME

Mounted CryoLoop – 10 micron

DESCRIPTION

0.2 – 0.3 mm – 25 pack

PRICE

$91.00

应用

  • Cryocrystallography
  • 低温晶体学

特征

  • Synthetic CryoLoop on stainless steel MicroTube
  • MicroTube specially engineered with EasySnap notches
  • 不锈钢 MicroTube 上的合成 CryoLoop
    MicroTube 特别设计,带有 EasySnap 凹槽

描述

Mounted CryoLoops with 10 micron diameter nylon. The 10 micron Mounted CryoLoop shows less background diffraction than the 20 micron Mounted CryoLoop. Please note that the 10 micron Mounted CryoLoops are very flexible due to their small diameter. These nylon loops are bonded to hollow, stainless steel MicroTubes™ that are used to mount, freeze, and secure the crystal during cryocrystallographic procedures and X-ray data collection. The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and secure to the CrystalCap using epoxy or similar adhesive. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.

Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.

安装有 10 微米直径尼龙的 CryoLoops。 10 微米安装的 CryoLoop 显示的背景衍射比 20 微米安装的 CryoLoop 少。请注意,10 微米安装的 CryoLoop 因其小直径而非常灵活。这些尼龙环与中空不锈钢 MicroTubes™ 粘合,用于在低温晶体学程序和 X 射线数据收集过程中安装、冷冻和固定晶体。 MicroTube 的长度为 24 毫米,专门设计了 10、12、14、18 和 21 毫米尺寸的 EasySnap™ 凹槽。要获得所需长度的 MicroTube,只需将 MicroTube 卡入所需长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。这些尼龙环显示出最小的衍射,很薄,可以快速冷冻,坚固且符合空气动力学。

大多数数据收集几何结构更喜欢或要求帽底和梁之间有 22 毫米的长度。对于使用 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 和 CrystalCap SPINE HT 的 22 mm 总长度,将 MicroTube 从底部的第二个凹口处卡入,形成 18 mm 的 MicroTube 长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。对于 22 mm 以上的长度,使用 CrystalCap Copper、CrystalCap Copper HT、CrystalCap ALS Copper HT 将 MicroTube 卡在从底部算起的第五个槽口(最靠近 CryoLoop 的槽口),并使用环氧树脂或类似粘合剂固定到 CrystalCap。

参考HR4-994 Mounted CryoLoop 0.025 – 0.05 mm

1. A novel approach to micro-sample X-ray powder diffraction using nylon loops. Reibenspies and Bhuvanesh. J. Appl. Cryst. (2003). 36, 1480-1481.

1. 一种使用尼龙环进行微量样品 X 射线粉末衍射的新方法。 Reibenspies 和 Bhuvanesh。 J.应用。 水晶。 (2003 年)。 36, 1480-1481。

日本同仁化学Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104- DOJINDO

上海金畔生物科技有限公司代理日本同仁化学 DOJINDO代理商全线产品,欢迎访问官网了解更多信息

上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等,我们将竭诚为您服务,欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。

Products > Cryocrystallography > CryoLoops > Adjustable Mounted CryoLoop™

Adjustable Mounted CryoLoop™

应用

  • Cryocrystallography
  • 低温晶体学

特征

  • Adjustable loop orientation
  • Synthetic CryoLoop on adjustable stainless steel MicroTube
  • MicroTube specially engineered with EasySnap notches
  • 20 micron diameter nylon CryoLoop
  • 可调环方向
    可调节不锈钢 MicroTube 上的合成 CryoLoop
    MicroTube 特别设计,带有 EasySnap 凹槽
    20 微米直径尼龙 CryoLoop

描述

Similar to the Mounted CryoLoop™ in design and function, the Adjustable Mounted CryoLoop allows one to manipulate and orient the CryoLoop to multiple, unique positions previously unattainable with typical cryo setups. The Adjustable Mounted CryoLoop is a 20 micron diameter synthetic loop mounted inside a malleable stainless steel sleeve, which in turn, is mounted inside the EasySnap MicroTube™.

Using forceps or a probe one can manipulate the angle and orientation of the CryoLoop by bending and adjusting the angle of the malleable stainless steel insert which holds the CryoLoop. The Adjustable Mounted CryoLoop may be positioned several times. Note: Repeated manipulation will fatigue the sleeve which can lead to failure of the sleeve. The Adjustable Mounted CryoLoop is designed to work with the CrystalCap System components.

The MicroTube is 24 mm in length and is specially engineered with EasySnap™ notches at the 10, 12, 14, 18, and 21 mm measures. To obtain the desired length of MicroTube, simply snap the MicroTube at the desired length and stake it to the CrystalCap™ Magnetic or CrystalCap™ Copper Magnetic. These nylon loops show minimal diffraction, are thin for fast freezing, strong, and aerodynamic.

Most data collection geometries prefer or require a 22 mm length between the base of the cap and the beam. For a 22 mm overall length using the CrystalCap, CrystalCap ALS, CrystalCap ALS HT and CrystalCap SPINE HT, snap the MicroTube at the second notch from the bottom, creating an 18 mm MicroTube lenghth and secure to the CrystalCap using epoxy or similar adhesive. For a 22 mm over length using the CrystalCap Copper, CrystalCap Copper HT, CrystalCap ALS Copper HT snap the MicroTube at the fifth notch from the bottom (notch closest to the CryoLoop) and secure to the CrystalCap using epoxy or similar adhesive.

在设计和功能上与 Mounted CryoLoop™ 类似,可调节的 Mounted CryoLoop 允许人们操纵 CryoLoop 并将其定位到多个独特的位置,这些位置以前是典型的低温设置无法达到的。可调节安装的 CryoLoop 是一个直径 20 微米的合成环,安装在可延展的不锈钢套管内,而不锈钢套管又安装在 EasySnap MicroTube™ 内。

使用镊子或探针可以通过弯曲和调整固定 CryoLoop 的可延展不锈钢插件的角度来控制 CryoLoop 的角度和方向。可调节安装的 CryoLoop 可以多次定位。注意:重复操作会使套筒疲劳,从而导致套筒失效。可调节安装的 CryoLoop 设计用于与 CrystalCap 系统组件一起使用。

MicroTube 的长度为 24 毫米,专门设计了 10、12、14、18 和 21 毫米尺寸的 EasySnap™ 凹槽。要获得所需长度的 MicroTube,只需将 MicroTube 卡入所需长度并将其固定在 CrystalCap™ Magnetic 或 CrystalCap™ Copper Magnetic 上。这些尼龙环显示出最小的衍射,很薄,可以快速冷冻,坚固且符合空气动力学。

大多数数据收集几何结构更喜欢或要求帽底和梁之间有 22 毫米的长度。对于使用 CrystalCap、CrystalCap ALS、CrystalCap ALS HT 和 CrystalCap SPINE HT 的 22 mm 总长度,将 MicroTube 从底部的第二个凹口处卡入,形成 18 mm 的 MicroTube 长度并使用环氧树脂或类似粘合剂固定到 CrystalCap。对于 22 mm 以上的长度,使用 CrystalCap Copper、CrystalCap Copper HT、CrystalCap ALS Copper HT 将 MicroTube 卡在从底部算起的第五个槽口(最靠近 CryoLoop 的槽口),并使用环氧树脂或类似粘合剂固定到 CrystalCap。

HR8-110 Adjustable Mounted CryoLoop 0.7 – 1.0 mm

Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104
Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104
Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104
Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104
Hampton蛋白结晶试剂盒Adjustable Mounted CryoLoop™/HR5-900/HR4-336/HR8-104

CAT NO

HR4-336

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.025 – 0.05 mm – 25 pack

PRICE

$107.00

CAT NO

HR4-338

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.05 – 0.1 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-102

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.1 – 0.2 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-072

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.2 – 0.3 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-104

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.3 – 0.4 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-106

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.4 – 0.5 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-108

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.5 – 0.7 mm – 25 pack

PRICE

$107.00

CAT NO

HR8-110

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

0.7 – 1.0 mm – 25 pack

PRICE

$107.00

CAT NO

HR5-900

NAME

Adjustable Mounted CryoLoop

DESCRIPTION

Sampler – 30 pack (5 of each diameter size 0.1 – 1.0 mm)

PRICE

$128.00