上海金畔生物科技有限公司代理日本同仁化学 DOJINDO代理商全线产品，欢迎访问官网了解更多信息
上海金畔生物代理Hampton research品牌蛋白结晶试剂耗材工具等，我们将竭诚为您服务，欢迎访问Hampton research官网或者咨询我们获取更多相关Hampton research品牌产品信息。
Products > Capillaries, Mounts & Supplies > Capillaries > Quartz Capillaries
Quartz Capillaries
应用
- X-ray data collection
- Liquid-liquid diffusion crystallization
- Gel acupuncture crystallization
- X 射线数据采集
液-液扩散结晶
凝胶针刺结晶
特征
- Thin walled – 10 micron
- Quartz Glass 0620
- 薄壁 – 10 微米
石英玻璃 0620
描述
Crystal Clear Quartz capillaries that are extremely thin walled (approximately 10 micron wall thickness). The length of the capillary has a well defined diameter, with one end having a funnel shape and the other end closed. Quartz capillaries have a wall thickness of 0.01 mm and an overall length of 80 mm +/-5 mm. Quartz capillaries are available in a wide range of outside diameters from 0.1 mm to 5.0 mm. They are designed to mount, hold, and store small molecule and biological macromolecular crystals for x-ray data collection. Capillaries can also be used for crystal density measurements and crystal growth experiments. The capillaries can be sealed tightly against moisture and gases using wax, epoxy, or other sealing materials.
In determining what glass or quartz capillary is right for you, please refer to the “Linear Absorption Coefficient µ cm-1” table. This table indicates the amount of radiation that is absorbed by the capillary during x-ray data collection.
For 0.1 mm to 2.5 mm capillaries the open end capillary tube base size is 3.0 +/- 0.2 mm OD x 0.2 +/- 0.15 mm Wall thickness. For 3.0 and 3.5 mm capillaries the open end capillary base size is about 4.4 mm OD x 0.25 mm Wall thickness. For 4.0 and 5.0 mm capillaries the open end capillary based size is about 6.0 x 0.25 mm.
The Diameter is measured about 30 to 40 mm from the closed end (measuring instrument: LaserMicrometer LS 7500) The tolerances are as follows.
晶莹剔透的石英毛细管，壁厚极薄（壁厚约 10 微米）。毛细管的长度具有明确定义的直径，一端为漏斗形，另一端封闭。石英毛细管的壁厚为 0.01 mm，总长度为 80 mm +/-5 mm。石英毛细管的外径范围很广，从 0.1 mm 到 5.0 mm。它们旨在安装、固定和存储小分子和生物大分子晶体，用于 X 射线数据收集。毛细管也可用于晶体密度测量和晶体生长实验。可以使用蜡、环氧树脂或其他密封材料将毛细管紧密密封以防潮气和气体。
在确定适合您的玻璃或石英毛细管时，请参阅“线性吸收系数 µ cm-1”表。该表显示了在 X 射线数据采集过程中被毛细管吸收的辐射量。
对于 0.1 mm 至 2.5 mm 毛细管，开口端毛细管底座尺寸为 3.0 +/- 0.2 mm OD x 0.2 +/- 0.15 mm 壁厚。对于 3.0 和 3.5 mm 毛细管，开口端毛细管底座尺寸约为 4.4 mm OD x 0.25 mm 壁厚。对于 4.0 和 5.0 mm 毛细管，基于开口端毛细管的尺寸约为 6.0 x 0.25 mm。
直径从封闭端测量约 30 至 40 毫米（测量仪器：LaserMicrometer LS 7500） 公差如下。
Diameter Tolerance Minimum Diameter Maximum Diameter
0.1 mm +/-0.05 mm 0.05 mm 0.15 mm
0.2 mm +/-0.05 mm 0.15 mm 0.25 mm
0.3 mm +/-0.05 mm 0.25 mm 0.35 mm
0.4 mm +/-0.05 mm 0.35 mm 0.45 mm
0.5 mm +/-0.05 mm 0.45 mm 0.55 mm
0.6 mm +/-0.05 mm 0.55 mm 0.65 mm
0.7 mm +/-0.05 mm 0.65 mm 0.75 mm
0.8 mm +/-0.05 mm 0.75 mm 0.85 mm
0.9 mm +/-0.05 mm 0.85 mm 0.95 mm
1.0 mm -0.05 +0.25 mm 0.95 mm 1.25 mm
1.5 mm +/-0.25 mm 1.25 mm 1.75 mm
2.0 mm +/-0.25 mm 1.75 mm 2.25 mm
2.5 mm +/-0.05 mm 2.25 mm 2.55 mm
3.0 mm +/-0.25 mm 2.75 mm 3.25 mm
3.5 mm +/-0.25 mm 3.25 mm 3.75 mm
4.0 mm +/-0.25 mm 3.75 mm 4.25 mm
5.0 mm +/-0.25 mm 4.75 mm 5.25 mm
Quartz Specifications
Glass type Fused silica / quartz glass
Density 2.2 g/cm3
Transformation temperature Tg= 1075 – 1210 degrees Celsius
Strain point approximately 1075 degrees Celsius
Annealing point approximately 1180 degrees Celsius
Softening point approximately 1730 degrees Celsius
Working point 1700 – 2100 degrees Celsius
Refractive index 1.46 589.3nm
Mohs hardness 5.5 – 6.5
Hydrolytic resistance, class 1 (DIN 12 111)
Acid resistance, class 1 (DIN 12 116)
Alkalai resistance, class 1 (DIN 52 322)
Chemical composition SiO2 99.99%
Trace elements
Al 16.00 ppm
Ca 0.80 ppm
Fe 0.80 ppm
K 0.90 ppm
Li 0.70 ppm
Na 0.90 ppm
Ti 1.50 ppm
Mg 0.10 ppm
Cu <0.05 ppm
Cr <0.05 ppm
Capillaries have only been tested at atmospheric pressure (760 mmHg (torr), 29.92 inHg, 14.696 psi). Use at other pressures has not been tested.
HR6-128 Quartz Capillary 0.1 mm
CAT NO
HR6-128
NAME
DESCRIPTION
Size: 0.1 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-130
NAME
DESCRIPTION
Size: 0.2 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-132
NAME
DESCRIPTION
Size: 0.3 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-134
NAME
DESCRIPTION
Size: 0.4 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-136
NAME
DESCRIPTION
Size: 0.5 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-138
NAME
DESCRIPTION
Size: 0.6 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-140
NAME
DESCRIPTION
Size: 0.7 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-142
NAME
DESCRIPTION
Size: 0.8 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-144
NAME
DESCRIPTION
Size: 0.9 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-146
NAME
DESCRIPTION
Size: 1.0 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-148
NAME
DESCRIPTION
Size: 1.5 mm – 25 pack
PRICE
$171.00
CAT NO
HR6-150
NAME
DESCRIPTION
Size: 2.0 mm – 25 pack
PRICE
$184.00
CAT NO
HR6-151
NAME
DESCRIPTION
Size: 2.5 mm – 15 pack
PRICE
$184.00
CAT NO
HR6-175
NAME
DESCRIPTION
Size: 3.0 mm – 15 pack
PRICE
$341.00
CAT NO
HR6-177
NAME
DESCRIPTION
Size: 4.0 mm – 5 pack
PRICE
$341.00
CAT NO
HR6-179
NAME
DESCRIPTION
Size: 5.0 mm – 5 pack
PRICE
$398.00
支持材料
Tolerances for Capillaries
Quartz Technical Data Sheet相关项目
- Capillary Cutting Stone™
- Duco Cement
- Beeswax
- Wax Pen
- Four Color Mounting Clay
- Adjustable Crystal Mount
- Brass Specimen Pin
- 毛细管切割石™
杜科水泥
蜂蜡
蜡笔
四色镶嵌粘土
可调节水晶支架
黄铜试样别针
Tolerances for Capillaries
Glass Number 50 Technical Data Sheet 
Tolerances for Capillaries
Special Glass 10 Technical Data Sheet